null

WAGO 2102-5306 TOPJOB®S feedthrough terminal block with Lever and Push-buttons, rail mount, 3-conductor, 5.2 mm wide, yellow

$2.93
SKU:
2102-5306
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 2102-5306 tOPJOB®S feedthrough terminal block with Lever and Push-buttons features rail mount, 3-conductor, 5.2 mm wide, yellow.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60947-7-1
  • IEC Approvals — Rated voltage (III / 3): 800 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
  • IEC Approvals — Rated current: 24 A
  • IEC Approvals — Current at conductor cross-section (max.) mm²: 32 A
  • IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 600 V
  • UL Approvals — Rated current UL (Use Group B): 20 A
  • UL Approvals — Rated voltage UL (Use Group C): 600 V
  • UL Approvals — Rated current UL (Use Group C): 20 A
  • Approvals per: CSA 22.2 No 158
  • Rated voltage CSA (Use Group B): 600 V
  • Rated current CSA (Use Group B): 20 A
  • Rated voltage CSA (Use Group C): 600 V
  • Rated current CSA (Use Group C): 20 A
  • Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
  • Ratings per: ATEX: PTB 18 ATEX 1010 U / IECEx: PTB 18.0001U (Ex eb IIC Gb)
  • Rated voltage EN (Ex e II): 550 V
  • Rated current (Ex e II): 20.5 A
  • Rated current (Ex e II) with jumper: 20 A
  • Power loss, per pole (potential): 0.766 W
  • Rated current IN for power loss specification: 24 A
  • Resistance value for specified, current-dependent power loss: 0.001 Ω
  • General information — Wiring direction: Front-entry wiring
  • Connection Data — Clamping units: 3
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection Data — Number of jumper slots: 2
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — Actuation Method: Lever
  • Connection 1 — Connectable conductor materials: Copper
  • Connection 1 — Nominal cross-section: 2.5 mm²
  • Connection 1 — Solid conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Solid conductor; push-in termination: 0.75 … 4 mm² / 18 … 12 AWG
  • Connection 1 — Stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm² / 22 … 14 AWG
  • Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1 … 2.5 mm² / 18 … 14 AWG
  • Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
  • Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
  • Connection 1 — Wiring direction: Front-entry wiring
  • Connection 2 — Actuation type: Push-button
  • Width: 5.2 mm / 0.205 inches
  • Height: 72.2 mm / 2.843 inches
  • Depth from upper-edge of DIN-rail: 32.9 mm / 1.295 inches
  • Depth: 39.5 mm / 1.555 inches
  • Mounting type: DIN-35 rail; DIN-35 rail
  • Marking level: Center/side marking
  • Color: yellow
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Actuator color: orange
  • Weight: 8.1 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.