Description
The WAGO 2092-1707 tHT pin strip features 1.4 mm Ø solder pin, straight, Pin spacing 5 mm, 7-pole, black.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 250V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4kV
- IEC Approvals — Rated voltage (III/2): 320V
- IEC Approvals — Rated impulse withstand voltage (III/2): 4kV
- IEC Approvals — Nominal voltage (II/2): 630V
- IEC Approvals — Rated impulse withstand voltage (II/2): 4kV
- IEC Approvals — Rated current: 16A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Number of poles: 7
- Pin spacing: 5 mm / 0.197 inches
- Width: 37.9 mm / 1.492 inches
- Height: 14.6 mm / 0.575 inches
- Height from the surface: 11 mm / 0.433 inches
- Depth: 2.8 mm / 0.110 inches
- Solder pin length: 3.6mm
- Solder pin diameter: 1.4mm
- Drilled hole diameter: 1.6 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for PCB
- Mismating protection: No
- Plugging without loss of pin spacing: Yes
- Mating direction to the PCB: 90°
- Locking of plug-in connection: none
- PCB contact: THT
- Color: black
- Insulation material (main housing): Polyphthalamide (PPA GF)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 1.5g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.
