Description
The WAGO 2092-1375 1-conductor THT female header features angled, push-button, Push-in CAGE CLAMP®, 2.5 mm², Pin spacing 5 mm, 5-pole, 1.4 mm Ø solder pin, 2,50 mm², light gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 250V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4kV
- IEC Approvals — Rated voltage (III/2): 320V
- IEC Approvals — Rated impulse withstand voltage (III/2): 4kV
- IEC Approvals — Nominal voltage (II/2): 630V
- IEC Approvals — Rated impulse withstand voltage (II/2): 4kV
- IEC Approvals — Rated current: 16A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300V
- UL Approvals — Rated current UL (Use Group B): 15A
- UL Approvals — Rated voltage UL (Use Group D): 300V
- UL Approvals — Rated current UL (Use Group D): 10A
- Connection Data — Clamping units: 5
- Connection Data — Total number of potentials: 5
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Push-button
- Connection 1 — Actuation direction 1: Operation parallel to conductor entry
- Connection 1 — Solid conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 2.5 mm²
- Connection 1 — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection 1 — Conductor connection direction to PCB: 0°
- Connection 1 — Number of poles: 5
- Pin spacing: 5 mm / 0.197 inches
- Width: 25 mm / 0.984 inches
- Height: 13.4 mm / 0.528 inches
- Depth: 15.4 mm / 0.606 inches
- Solder pin length: 3.6mm
- Solder pin diameter: 1.4mm
- Drilled hole diameter: 1.6 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Female connector/socket
- Connector (connection type): for PCB
- Mismating protection: No
- Plugging without loss of pin spacing: Yes
- Mating direction to the PCB: 0°
- Locking of plug-in connection: none
- PCB contact: THT
- Color: light gray
- Insulation material (main housing): Polyphthalamide (PPA GF)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 5.7g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.
