Description
The WAGO 2092-1306 tHT female header features straight, Pin spacing 5 mm, 6-pole, 0.4 x 1.3 mm solder pin, light gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 250V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4kV
- IEC Approvals — Rated voltage (III/2): 320V
- IEC Approvals — Rated impulse withstand voltage (III/2): 4kV
- IEC Approvals — Nominal voltage (II/2): 630V
- IEC Approvals — Rated impulse withstand voltage (II/2): 4kV
- IEC Approvals — Rated current: 16A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300V
- UL Approvals — Rated current UL (Use Group B): 15A
- UL Approvals — Rated voltage UL (Use Group D): 300V
- UL Approvals — Rated current UL (Use Group D): 10A
- Connection Data — Total number of potentials: 6
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Number of poles: 6
- Pin spacing: 5 mm / 0.197 inches
- Width: 30 mm / 1.181 inches
- Height: 19.8 mm / 0.78 inches
- Height from the surface: 16.2 mm / 0.638 inches
- Depth: 13.6 mm / 0.535 inches
- Solder pin length: 3.6mm
- Solder pin dimensions: 0.4 x 1.3 mm
- Drilled hole diameter: 1.5 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Female header
- Connector (connection type): for PCB
- Mismating protection: No
- Plugging without loss of pin spacing: Yes
- Mating direction to the PCB: 90°
- Locking of plug-in connection: none
- PCB contact: THT
- Color: light gray
- Insulation material (main housing): Polyphthalamide (PPA GF)
- Flammability class per UL94: V0
- Contact material: Copper alloy
- Weight: 5.6g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
