Description
The WAGO 2022-1201 X-COM S 1-conductor/1-pin carrier terminal block features 2.5 mm², for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2,50 mm², gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 690V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6kV
- IEC Approvals — Rated current: 24A
- IEC Approvals — Current at conductor cross-section (max.) mm²: 32A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 600V
- UL Approvals — Rated current UL (Use Group B): 20A
- UL Approvals — Rated voltage UL (Use Group C): 600V
- UL Approvals — Rated current UL (Use Group C): 20A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group C): 600V
- Rated current CSA (Use Group C): 20A
- Power loss, per pole (potential): 0.766W
- Rated current IN for power loss specification: 24A
- Resistance value for specified, current-dependent power loss: 0.001Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 1
- Connection Data — Female plug slots: 1
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 2.5 mm²
- Connection 1 — Solid conductor: 0.25 … 4 mm² / 22 … 12 AWG
- Connection 1 — Solid conductor; push-in termination: 1 … 4 mm² / 18 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm² / 22 … 14 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1 … 2.5 mm² / 18 … 14 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 5.2 mm / 0.205 inches
- Height: 48.5 mm / 1.909 inches
- Depth from upper-edge of DIN-rail: 36.4 mm / 1.433 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 5g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
