Description
The WAGO 2020-2239 X-COM S-Mini x-COM S-Mini double-deck carrier/feedthrough terminal block features internally commoned (N), with marker carrier, rail mount, 2-conductor, 2-pin, 3.5 mm wide, blue.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 500V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6kV
- IEC Approvals — Rated current: 13.5A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300V
- UL Approvals — Rated current UL (Use Group B): 15A
- UL Approvals — Rated voltage UL (Use Group C): 300V
- UL Approvals — Rated current UL (Use Group C): 15A
- UL Approvals — Rated voltage UL (Use Group D): 300V
- UL Approvals — Rated current UL (Use Group D): 15A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group B): 300V
- Rated current CSA (Use Group B): 10A
- Rated voltage CSA (Use Group C): 300V
- Rated current CSA (Use Group C): 10A
- Power loss, per pole (potential): 0.434W
- Rated current IN for power loss specification: 13.5A
- Resistance value for specified, current-dependent power loss: 0.002Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Female plug slots: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 2
- Connection Data — Number of jumper slots: 3
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 1 mm²
- Connection 1 — Solid conductor: 0.14 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Solid conductor; push-in termination: 0.5 … 1.5 mm² / 20 … 16 AWG
- Connection 1 — Fine-stranded conductor: 0.14 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.14 … 0.75 mm² / 24 … 18 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 0.5 … 0.75 mm² / 20 … 18 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Connection 1 — Strip length: 9 … 11 mm / 0.35 … 0.43 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 3.5 mm / 0.138 inches
- Height: 80.1 mm / 3.154 inches
- Depth from upper-edge of DIN-rail: 61.4 mm / 2.417 inches
- Potential Marking: N
- Design: horizontal type
- Mounting type: DIN-35 rail
- Marking level: Side marking
- Color: blue
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 10g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C