Description
The WAGO 2006-8033 TOPJOB® S distribution terminal block features with operating slots, 1 x 6 mm² / 6 x 1.5 mm², with integrated end plate, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 6,00 mm², red.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 800V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8kV
- IEC Approvals — Rated current: 41A
- IEC Approvals — Current at conductor cross-section (max.) mm²: 57A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Power loss, per pole (potential): 1.311W
- Rated current IN for power loss specification: 41A
- Resistance value for specified, current-dependent power loss: 0.001Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 7
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection type: Input
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Total number of connection points: 1
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 6 mm²
- Connection 1 — Solid conductor: 0.5 … 10 mm² / 20 … 8 AWG
- Connection 1 — Solid conductor; push-in termination: 2.5 … 10 mm² / 14 … 8 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 10 mm² / 20 … 8 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 6 mm² / 20 … 10 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 2.5 … 6 mm² / 16 … 10 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Connection 1 — Strip length: 13 … 15 mm / 0.51 … 0.59 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Connection 2 — Connection type: Output
- Connection 2 — Connection technology: Push-in CAGE CLAMP®
- Connection 2 — Number of connection points: 6
- Connection 2 — Nominal cross-section: 1.5 mm²
- Connection 2 — Solid conductor: 0.25 … 2.5 mm² / 22 … 14 AWG
- Connection 2 — Solid conductor, push-in termination: 0.75 … 2.5 mm² / 18 … 14 AWG
- Connection 2 — Fine-stranded conductor: 0.25 … 2.5 mm² / 22 … 14 AWG
- Connection 2 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm² / 22 … 16 AWG
- Connection 2 — Fine-stranded conductor; with ferrule; push-in termination: 0.75 … 1.5 mm² / 18 … 16 AWG
- Connection 2 — Strip length: 9 … 11 mm / 0.35 … 0.43 inches
- Width: 9 mm / 0.354 inches
- Height: 73.8 mm / 2.905 inches
- Depth from upper-edge of DIN-rail: 32.9 mm / 1.295 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: red
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 16.2g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C