Description
The WAGO 2006-1674 TOPJOB® S disconnect terminal block features with test option, orange disconnect link, 2-conductor, 7.5 mm, blue.
Specifications
- IEC Approvals — Rated voltage (III / 3): 800V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8kV
- IEC Approvals — Rated current: 30A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 600V
- UL Approvals — Rated current UL (Use Group B): 30A
- UL Approvals — Rated voltage UL (Use Group C): 600V
- UL Approvals — Rated current UL (Use Group C): 30A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group B): 600V
- Rated current CSA (Use Group B): 30A
- Rated voltage CSA (Use Group C): 600V
- Rated current CSA (Use Group C): 30A
- Power loss, per pole (potential): 0.702W
- Rated current IN for power loss specification: 30A
- Resistance value for specified, current-dependent power loss: 0.001Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 2
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 6 mm²
- Connection 1 — Solid conductor: 0.5 … 10 mm² / 20 … 8 AWG
- Connection 1 — Solid conductor; push-in termination: 2.5 … 10 mm² / 14 … 8 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 10 mm² / 20 … 8 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 6 mm² / 20 … 10 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 2.5 … 6 mm² / 16 … 10 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Connection 1 — Strip length: 13 … 15 mm / 0.51 … 0.59 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 7.5 mm / 0.295 inches
- Height: 96.3 mm / 3.791 inches
- Depth from upper-edge of DIN-rail: 36.8 mm / 1.449 inches
- Mounting type: DIN-35 rail
- Marking level: Center/side marking
- Color: blue
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 19.5g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
