Description
The WAGO 2002-2941 TOPJOB® S double-deck carrier terminal block features carrier/carrier (L/L), for disconnect, fuse or component plug, rail mount, 2-conductor, 5.2 mm wide, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 400V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6kV
- IEC Approvals — Rated current: 16A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300V
- UL Approvals — Rated current UL (Use Group B): 15A
- UL Approvals — Rated voltage UL (Use Group C): 300V
- UL Approvals — Rated current UL (Use Group C): 15A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group B): 300V
- Rated current CSA (Use Group B): 15A
- Rated voltage CSA (Use Group C): 150V
- Rated current CSA (Use Group C): 15A
- Rated voltage CSA (Use Group D): 300V
- Rated current CSA (Use Group D): 15A
- Ratings per: ATEX: KIWA 17 ATEX 0030 U / IECEx: KIWA 17.0014U (Ex ec IIC Gc)
- Rated voltage EN (Ex e II): 440V
- Rated current (Ex e II): 14A
- Power loss, per pole (potential): 0.341W
- Rated current IN for power loss specification: 16A
- Resistance value for specified, current-dependent power loss: 0.001Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 4
- Connection Data — Total number of potentials: 4
- Connection Data — Number of levels: 2
- Connection Data — Number of jumper slots: 2
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 2.5 mm²
- Connection 1 — Solid conductor: 0.25 … 4 mm² / 22 … 12 AWG
- Connection 1 — Solid conductor; push-in termination: 0.75 … 4 mm² / 18 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm² / 22 … 14 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1 … 2.5 mm² / 18 … 14 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 5.2 mm / 0.205 inches
- Height: 108 mm / 4.252 inches
- Depth from upper-edge of DIN-rail: 42 mm / 1.654 inches
- Potential Marking: L/L
- Mounting type: DIN-35 rail
- Marking level: Side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 15.9g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C