Description
SICK 1097504 DUS60E-REKK0ABA Incremental encoders.
Safety-related parameters
- MTTFD (mean time to dangerous failure): 275 years (EN ISO 13849-1) 1)
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Performance
- Measuring step: 90°, electric/pulses per revolution
- Measuring step deviation: ± 18° / pulses per revolution
- Error limits: Measuring step deviation x 3
- Duty cycle: ≤ 0.5 ± 5 %
Interfaces
- Communication interface: Incremental
- Communication Interface detail: TTL / HTL 1)
- Number of signal channels: 6-channel
- Programmable/configurable: ✔
- Parameterising data: DIP switch, selectable output
- Output function: A and B output
- Initialization time: < 5 ms 2)
- Output frequency: + 60 kHz
- Load current: ≤ 30 mA, per channel
- Operating current: ≤ 120 mA (without load)
- Power consumption: ≤ 1.25 W (without load)
- Pulses per revolution: ✔
- Output voltage: ✔
- Direction of rotation: ✔
- Configuration switches: 2048 PPR values, direction selection, TTL/HTL selectable
1) The output is not selectable for DIP switch configurations E, F, and G. The output voltage value is dependent on the supply voltage.
2) Valid positional data can be read once this time has elapsed.
Electronics
- Connection type: Cable, 8-wire, universal, 1.5 m 1)
- Supply voltage: 4.75 ... 30 V
- Reference signal, number: 1
- Reference signal, position: 180°, electric, gated with A
- Reverse polarity protection: ✔
- Short-circuit protection of the outputs: ✔
1) The universal cable connection is positioned so that it is possible to lay it without bends in a radial or axial direction.
Mechanics
- Mechanical design: Through hollow shaft
- Shaft diameter: 12 mm; Rear clamping
- Flange type / stator coupling: 2-point stator coupling, slot, hole diameter 63 mm – 83 mm
- Weight (technical data): 0.25 kg 1)
- Shaft material: Stainless steel
- Flange material: Aluminum
- Housing material: Aluminum
- Material, cable: PVC
- Start up torque: 0.5 Ncm (+20 °C)
- Operating torque: 0.4 Ncm (+20 °C)
- Permissible movement static: ± 0.3 mm (radial); ± 0.5 mm (axial)
- Permissible movement dynamic: ± 0.1 mm (radial); ± 0.2 mm (axial)
- Operating speed: 1,500 min⁻¹
- Moment of inertia of the rotor: 50 gcm²
- Bearing lifetime: 3.6 x 109 revolutions
- Angular acceleration: ≤ 500,000 rad/s²
1) Based on encoder with male connector.
Ambient data
- EMC: According to EN 61000-6-2 and EN 61000-6-3
- Enclosure rating: IP65 1)
- Permissible relative humidity: 90 % (Condensation not permitted)
- Operating temperature range: –30 °C ... +90 °C
- Storage temperature range: –40 °C ... +75 °C
- Resistance to shocks: 100 g (EN 60068-2-27)
- Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
1) When the mating connector is installed and the DIP switch door is sealed with the encoder housing.
Certificates
- EU declaration of conformity: ✔
- UK declaration of conformity: ✔
- ACMA declaration of conformity: ✔
- China RoHS: ✔
- cULus certificate: ✔
- Information according to Art. 3 of Data Act (Regulation EU 2023/2854): ✔
Image is representative and may differ from the supplied item.