null

SICK 1084082 DFS20A-M1A1C000600 Incremental encoders, Male connector, M12, 8-pin, radial, 4.5 ... 5.5 V

$545.00
SKU:
1084082
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

SICK 1084082 DFS20A-M1A1C000600 Incremental encoders.

Safety-related parameters

  • MTTFD (mean time to dangerous failure): 330 years (EN ISO 13849-1) 1)

1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

Performance

  • Pulses per revolution: 600
  • Measuring step: ± 90°, electric/pulses per revolution
  • Measuring step deviation: ± 0.008° pulses 100 ... 10,000
  • Error limits: ± 0.03°

Interfaces

  • Communication interface: Incremental
  • Communication Interface detail: TTL / RS-422
  • Number of signal channels: 6-channel
  • Initialization time: 40 ms 1)
  • Output frequency: 820 kHz
  • Load current: 30 mA
  • Operating current: 50 mA (without load)

1) Valid positional data can be read once this time has elapsed.

Electronics

  • Connection type: Male connector, M12, 8-pin, radial 1)
  • Supply voltage: 4.5 ... 5.5 V
  • Reference signal, number: 1
  • Reference signal, position: 180°, electric, gated with A
  • Code sequence: Clockwise
  • Reverse polarity protection: ✔
  • Short-circuit protection of the outputs: ✔ 2)

1) The Zero-Set function is not available with 6-pin MS connector or M12 connector options.

2) Short-circuit opposite to another channel or GND permissable for maximum 30 s.

Mechanics

  • Mechanical design: Solid shaft, Servo flange
  • Shaft diameter: 1/4″; With flat
  • Shaft length: 16 mm
  • Weight (technical data): + 0.4 kg 1)
  • Shaft material: Stainless steel 1,4305
  • Flange material: Aluminum
  • Housing material: Aluminum
  • Start up torque: 0.5 Ncm (+20 °C)
  • Operating torque: 0.3 Ncm (+20 °C)
  • Permissible shaft loading: 80 N (radial); 40 N (axial)
  • Operating speed: ≤ 9,000 min⁻¹
  • Moment of inertia of the rotor: 15 gcm²
  • Bearing lifetime: 3.6 x 109 revolutions
  • Angular acceleration: ≤ 500,000 rad/s²

1) Based on encoder with MS male connector.

Ambient data

  • EMC: According to EN 61000-6-2 and EN 61000-6-3
  • Enclosure rating: IP65, shaft side (IEC 60529); IP67, housing side (IEC 60529)
  • Permissible relative humidity: 90 % (Condensation not permitted)
  • Operating temperature range: –30 °C ... +85 °C
  • Storage temperature range: –40 °C ... +100 °C, without package
  • Resistance to shocks: 100 g, 11 ms (EN 60068-2-27)
  • Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)

Certificates

  • EU declaration of conformity: ✔
  • UK declaration of conformity: ✔
  • ACMA declaration of conformity: ✔
  • China RoHS: ✔
  • Information according to Art. 3 of Data Act (Regulation EU 2023/2854): ✔

Image is representative and may differ from the supplied item.

Download SICK product specification sheet (PDF)