Description
SICK 1036780 DFS60B-BJPC10000 Incremental encoders.
Safety-related parameters
- MTTFD (mean time to dangerous failure): 300 years (EN ISO 13849-1) 1)
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Performance
- Pulses per revolution: 10,000 1)
- Measuring step: 90°, electric/pulses per revolution
- Measuring step deviation at non binary number of lines: ± 0.01°
- Error limits: ± 0.05°
1) See maximum revolution range.
Interfaces
- Communication interface: Incremental
- Communication Interface detail: TTL / HTL
- Factory setting: Factory setting: output level TTL
- Number of signal channels: 6-channel
- Programmable/configurable: ✔
- Initialization time: 32 ms, 30 ms 1)
- Output frequency: ≤ 600 kHz
- Load current: ≤ 30 mA
- Power consumption: ≤ 0.7 W (without load)
1) With mechanical zero pulse width.
Electronics
- Connection type: Male connector, M12, 8-pin, radial
- Supply voltage: 4.5 ... 32 V
- Reference signal, number: 1
- Reference signal, position: 90°, electric, logically gated with A and B
- Reverse polarity protection: ✔
- Short-circuit protection of the outputs: ✔ 1)2)
1) Programming TTL with ≥ 5.5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.
2) Programming HTL or TTL with < 5.5 V: short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
Mechanics
- Mechanical design: Blind hollow shaft
- Shaft diameter: 5/8″; Front clamp
- Weight (technical data): + 0.2 kg
- Shaft material: Stainless steel
- Flange material: Aluminum
- Housing material: Aluminum die cast
- Start up torque: 0.8 Ncm (+20 °C)
- Operating torque: 0.6 Ncm (+20 °C)
- Permissible movement static: ± 0.3 mm (radial); ± 0.5 mm (axial)
- Permissible movement dynamic: ± 0.1 mm (radial); ± 0.2 mm (axial)
- Operating speed: ≤ 6,000 min⁻¹ 1)
- Moment of inertia of the rotor: 40 gcm²
- Bearing lifetime: 3.6 x 10^10 revolutions
- Angular acceleration: ≤ 500,000 rad/s²
1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
Ambient data
- EMC: According to EN 61000-6-2 and EN 61000-6-3
- Enclosure rating: IP67, Housing side, male connector (IEC 60529) 1); IP65, shaft side (IEC 60529)
- Permissible relative humidity: 90 % (Condensation not permitted)
- Operating temperature range: –40 °C ... +100 °C 2); –30 °C ... +100 °C 3)
- Storage temperature range: –40 °C ... +100 °C, without package
- Resistance to shocks: 70 g, 6 ms (EN 60068-2-27)
- Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
1) With mating connector fitted.
2) Stationary position of the cable.
3) Flexible position of the cable.
Certificates
- EU declaration of conformity: ✔
- UK declaration of conformity: ✔
- ACMA declaration of conformity: ✔
- Moroccan declaration of conformity: ✔
- China RoHS: ✔
- cULus certificate: ✔
- Information according to Art. 3 of Data Act (Regulation EU 2023/2854): ✔
Image is representative and may differ from the supplied item.