Hoffman P2KDR18164 Type 12 Proline G2 Disconnect Package

APPLICATION:

Proline G2 Disconnect Packages are full-featured, ready-to-use enclosures which make it easy to create flange-mount disconnect solutions using major brand disconnect switches and circuit breakers. A hinged disconnect mullion provides unobstructed access to the interior and maximum access to the Full Mounting Subpanel (Mounting Plate). A flush swing handle with defeater operates an internal 3-point latch system on the disconnect door and latches to the disconnect mullion. Interlocking is provided from the primary door to the disconnect mullion. Side covers are included with Proline G2 Disconnect Packages.

FEATURES:

• Hinged mullion with standard cutout (for flange-mount disconnect)
• Interlock from master door to mullion
• Left and right disconnect standard options
• Side covers included in package

SPECIFICATIONS:

Disconnect Frame:

• Disconnect Frames greater than 1000 mm tall include two removable center uprights (front and rear) which are offset 100 mm from the center of the frame
• 12 gauge (2.5 mm) roll formed steel frame, fully welded corners, hybrid profile
• Accommodate the 25-mm DIN standard and include rectangular and round holes

Disconnect Doors:

• Includes a hinged mullion with a standard cutout which accommodates a wide variety of flange-mount disconnect devices
• Mullion is opened via two quarter-turn cams
• Right-hand disconnects have the mullion on the right; left-hand disconnects have the mullion on the left
• Doors swing to the left for right-hand disconnects; doors swing to the right for left-hand disconnects
• Two-door disconnect packages (if used) have a center mullion, and both doors swing in the same direction (not overlapping)
• A low-profile flush swing handle with key lock (other options available) operates an internal 3-point latch system on the door
• Door bar system on all doors (not on disconnect mullion)

Mechanical Interlock:

• Integrated interlock system from the doors to the disconnect mullion
• Interlock must be defeated to unlock either door
• The primary door must be in the open position to open the secondary door
• The primary door must be in the open position to open the mullion

Gasket:

• Seamless polyurethane gasket provides a watertight, dust-tight seal against moisture and contaminants
• UL component recognized, CSA compliant
• Sealed mounting for all external accessories

Mounting Subpanel:

• Includes EZ-Load Glide Blocks, which accommodate five loading options: vertical front, vertical side, vertical rear, horizontal front (frame over subpanel), horizontal rear (subpanel lowered into frame)
• Subpanel is securely fastened to the top and bottom of the frame. Enclosures less than 1200 mm wide use 4 sets of EZ-Load Glide Blocks. Enclosures 1200 mm wide or greater use 8 sets of glide blocks for a well secured subpanel.
• Depth adjustable, accommodates back-to-back subpanels
• Galvanized full subpanel default; painted subpanel available

System:

• Can be bayed to a Proline G2 Industrial Package, however a Proline G2 Barrier Panel (not included) must be used between the Disconnect Package and the Industrial Package to maintain disconnect integrity
• The disconnect mullion and disconnect door include 140-degree hinges and are gasketed to maintain enclosure integrity.

Standard right- or left-hand provision will accept the following Categorys of flange-mounted disconnect devices:

• Allen-Bradley (Bulletin 1494V - disconnect switches with flange-mounted, variable-depth operating mechanisms and Bulletin 1494V flange-mounted variable-depth operating mechanisms for circuit breakers
• ABB Controls (Disconnect switches up to 200 amp and operators for ABB circuit breakers up to 800 amp)
• Eaton Cutler-Hammer (Variable-depth disconnect switches up to 200 amp, operators for circuit breakers up to 600 amp, and FLEX SHAFT® handle mechanisms for circuit breakers)
• General Electric (Category TDA variable-depth mechanisms for disconnect switches up to 200 amp, and operator mechanisms or SPECTRA FLEX® cable operator for circuit breakers up to 600 amp)
• Siemens ITE (MAX-FLEX flange-mounted, variable depth operating handle for disconnect switches and circuit breakers as well as some fixed depth operators for disconnect switches)
• Schneider Square D (Class 9422 disconnect switches up to 200 amp with variable-depth or cable mechanisms for 30, 60 or 100 amp, and circuit breakers with variable-depth operators or cable mechanisms up to 400 amp)

Note: There are Proline G2 Disconnect Door options with a larger cutout for use with higher amp disconnect switches.

FINISH:

• Frame, Doors, Tops, Covers - polyester powder paint; RAL 7035 textured light gray standard; custom colors available
• Mounting Subpanel - galvanized steel
• Gland Plate - galvanized steel

ACCESSORIES:

• Barrier Panel
• Grid Strap Network (Rail System)
• Partial Subpanel and Side-Mount Panel
• Frame Joining Kits
• Flush Swing Handles
• Proline Grounding Kit