Product Overview
AC-EX40-444-KIT-SEA
- Direct Rain
- Dust
- Humidity
- Sea Fog
- Salt Fog
- Some Chemicals
- Heat
Protecting delicate electronics with Sealoc's nano-coating solution creates a virtually invisible, durable, waterproofing protective layer that works primarily with AVPro Edge's own computer boards and components. The nano-coating creates a formidable barrier on circuitry that encapsulates the electronic components, protecting against water, moisture, humidity, dust, salt-air, and corrosion of various types.
The team at Sealoc does more than coat our extenders with their magic liquid. They also ensured the chassis were sealed correctly with extensive testing:
- Testing overarching effectiveness of Sealoc's Nano Fluid Treatment.
- Testing on the Receiver units was done as hybrid applications meaning outdoor, covered, and in full direct rain situations.
- Testing for environments with heat, humidity, salt fog, rainfall, and more.
- Rated IPX68
The rainfall testing had the most significant impact on the functionality of the units. All control units failed immediately when the water was turned on.
A significant portion of protection is a coating made from a nanofluid developed explicitly for electronic boards by Sealoc. Ensure you have the tools to extend the life of installations in harsher conditions.
FULL FEATURE SET
- HDMI 2.0(a/b)
- 18Gbps Bandwidth Support (Using ICT)
- Ultra Slim (.47 inch/12mm)
- Up to 4K60 4:4:4 Support
- Full HDR Support (HDR 10 & 12 Bit)
- HDR, HDR10+ and HLG Support
- 4K --> 1080P Down-scaling for mixed systems
- EDID Management and EDID emulate
- 4K & HD Test Patterns built into Tx and Rx for troubleshooting
- L/R Audio Extraction on Tx and Rx
- HDCP 2.2 (and all earlier versions supported)
- CEC Pass Through
- 3D Support
- 70M (230ft) on 1080P (Cat6a)
- Up to 40m (131ft) on 4K (up to 4K60 4:4:4, HDR) (Cat6a)
- Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed)
- I-Pass Feature for control system "pass-through"
- 3-20v protection circuit built in for safe IR transport
- Bi Directional RS232 Transport
- LED Status, Link, Power indication lights
- Use single UTP/STP LAN cable (CAT-6A) with substitute HDMI cable to achieve long distance transmission.
- Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos on HDMI
- ESD protection circuitry (Inputs & Outputs) to 7KV
- Can Cascade
- AC-EX40-444-T (Transmitter)
- AC-EX40-444-R (Receiver)
- 48V Power Supply (One supplied)
- 1 x IR Tx Unit
- 1 x IR Rx Unit
- 4x 3 Pin Terminal blocks for Audio and RS232 Ports
- Mounting Ears
AC-EX40-444-KIT-SEA
- Direct Rain
- Dust
- Humidity
- Sea Fog
- Salt Fog
- Some Chemicals
- Heat
Protecting delicate electronics with Sealoc's nano-coating solution creates a virtually invisible, durable, waterproofing protective layer that works primarily with AVPro Edge's own computer boards and components. The nano-coating creates a formidable barrier on circuitry that encapsulates the electronic components, protecting against water, moisture, humidity, dust, salt-air, and corrosion of various types.
The team at Sealoc does more than coat our extenders with their magic liquid. They also ensured the chassis were sealed correctly with extensive testing:
- Testing overarching effectiveness of Sealoc's Nano Fluid Treatment.
- Testing on the Receiver units was done as hybrid applications meaning outdoor, covered, and in full direct rain situations.
- Testing for environments with heat, humidity, salt fog, rainfall, and more.
- Rated IPX68
The rainfall testing had the most significant impact on the functionality of the units. All control units failed immediately when the water was turned on.
A significant portion of protection is a coating made from a nanofluid developed explicitly for electronic boards by Sealoc. Ensure you have the tools to extend the life of installations in harsher conditions.
FULL FEATURE SET
- HDMI 2.0(a/b)
- 18Gbps Bandwidth Support (Using ICT)
- Ultra Slim (.47 inch/12mm)
- Up to 4K60 4:4:4 Support
- Full HDR Support (HDR 10 & 12 Bit)
- HDR, HDR10+ and HLG Support
- 4K --> 1080P Down-scaling for mixed systems
- EDID Management and EDID emulate
- 4K & HD Test Patterns built into Tx and Rx for troubleshooting
- L/R Audio Extraction on Tx and Rx
- HDCP 2.2 (and all earlier versions supported)
- CEC Pass Through
- 3D Support
- 70M (230ft) on 1080P (Cat6a)
- Up to 40m (131ft) on 4K (up to 4K60 4:4:4, HDR) (Cat6a)
- Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed)
- I-Pass Feature for control system "pass-through"
- 3-20v protection circuit built in for safe IR transport
- Bi Directional RS232 Transport
- LED Status, Link, Power indication lights
- Use single UTP/STP LAN cable (CAT-6A) with substitute HDMI cable to achieve long distance transmission.
- Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos on HDMI
- ESD protection circuitry (Inputs & Outputs) to 7KV
- Can Cascade
- AC-EX40-444-T (Transmitter)
- AC-EX40-444-R (Receiver)
- 48V Power Supply (One supplied)
- 1 x IR Tx Unit
- 1 x IR Rx Unit
- 4x 3 Pin Terminal blocks for Audio and RS232 Ports
- Mounting Ears