Description
The AtlasIED TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio end point but is ideally suited to be used with the AtlasIED WTSD wall mixer series. Once converted into Dante® digital audio, the audio can be transmitted over IP networks and routed in the Dante® Controller software. The TSD-DAC2i Dante® transmitter I/O module features two analog balanced line inputs with a variable gain to operate from line to mic level. An Input Clip indicator illuminates when clipping signals are present. There are indicators for Power and Network connection. The TSD-DAC2i requires no external power supply, it is powered via a network PoE port or a PoE cable power injector.
Features
- Dante® digital audio platform
- 2 CH Balanced Analog Line Input
- Wide range gain adjust -20dB to +20dB
- AUX, Line & Mic Levels
- Input Clip Indicator
- PoE Powered
- Mounting Plate
- Incorporates with WTSD Wall Mixers
Specifications
- Network Interface: Single RJ-45
- Input impedance: 15kΩ (Analog)
- Frequency Response: 20Hz - 20kHz (+/- 2dB)
- THD: .06% @ 1kHz
- Signal to Noise Ratio: 95dB @ 1kHz (A Weighted)
- Dynamic Range: 100dB (-60dBFS A Weighted)
- Power Source: PoE (52V 36mA)
- Power Consumption: 1.9W
- Height: 1" (25mm)
- Width: 3.6" (93mm)
- Depth: 3.17" (81mm)
- Weight: .44 lbs (0.20kg)
- Shipping Weight: .7 lbs (0.32kg)
- Warranty Period: 36 months from date of purchase