Description
UTP Passive Transceiver Hub, 8 Channel, Video up to 750', Integrated 24/28VAC Isolated Power Supply, 220VAC, BC300
Altronix HubSat8DiV Passive UTP Transceiver Hub with Integral Isolated Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. Optionally, the HubSat8DiV can be used as an accessory module to transmit video from up to 8 cameras over two (2) separate CAT-5 or higher structured cables back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat8DiV provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Input
220VAC 60Hz, 1.7A.
Primary in-line fuses are rated @ 3.5A/250V.
Video
Eight (8) channels of quality video over twisted pair up to a distance of 228.6m (750 ft.) per channel.
Eight (8) 75 ohm video outputs.
Data
RS422/RS485 data input.
Power
Individually selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1A max. per channel not to exceed a total of 8A maximum current.
PTC protected outputs are rated @ 1A per channel.
Surge suppression.
Visual Indicators
Eight (8) power LED indicators.
Temperature
Operating 0° C to 49° C (32° F to 120° F).
Storage - 20° C to 70°C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.):
24VDC: 98 BTU/Hr.
28VDC: 115 BTU/Hr.
